Your engine will start like it's the middle of Summer!
Reduced tailpipe smoke at start up
Reduced smoke means LONGER DPF life! Our kit pays for itself with this benefit alone!
Less wear and tear on the engine and starting components
Increased Starter life (Sprinter starters aren't cheap at $250!)
Increased Glow Plug life (Set of 6 glow plugs are over $100 just for the parts! )
Increased Battery life (German batteries aren't cheap!)
Reduced warm up idle time
A warm engine uses less fuel
Enjoy Cabin Heat sooner
Defrost ice and frost off the windows sooner for safer vision
Works great with your Bio Diesel or Waste Vegetable Oil Conversion!
Easy to install - 1 to 2 hours on average
Custom fit for 2007 thru 2018 Sprinter Van NCV3 with the 3.0L OM642 V6 diesels
Compact, about the size of two 12oz soft drink cans
Factory appearance when installed
Quality heater and Major Hose suppliers like Gates, Continental, and Dayco
Custom Hoses for exact fit (Both upper & lower are specific to your year and model diesel)
Rub Protection on the hoses for longevity specific to your year and model diesel
Custom Bracket specific to your year and model diesel
Thermostatically controlled prevents over-heating
Kit comes fully-assembled, ready to install
Kit comes with an extra long cord to help reach the driver's side front bumper, but the cord can be routed to your choosing. Purchase the optional bumper plug for the ultimate plug-n-play solution
Click Here to Order
FrostHeater Details:
Diesel Engine Coolant Heater Kit is custom fit for Sprinter vans NCV3 with the 3.0L OM642 diesel engine. The 1000 WATT tank heater circulates coolant throughout the engine for QUICKER STARTS AND HEAT SOONER!* (Diesel owners know how long it takes to get heat!)
Benefits include: reducing wear on the glow plugs, starter and battery, and increasing life of your DPF! Oil pan heaters only heat the oil, lower hose heaters are lame and don't work anyway.
The kit is compact in size, comes pre-assembled with all necessary parts, hoses, and mounting bracket, to install the heater in an afternoon. Just add your own coolant and time.
These are brand new heaters engineered to fit exclusively the 2007 thru 2018 Sprinter vans NCV3 with the 3.0L OM642 diesel engine. The heater is about the size of two 12oz soda pop cans, and fits nicely under the hood.
The kit fits like a glove, and has good clearance around the heater even when installing the unit. It will have a factory appearance when installed. We've had people say our kits have always looked factory installed.
Our kit ensures a correct installation and operation.
Engineered with the following kept in mind:
It must appear factory, like it was designed to be there with clearance around the unit
It must maintain factory bend radius requirements for Mercedes coolant hoses
It must have a low or no impact on the cooling system
It must be mounted in such a way to minimize engine vibration through the heater
It must consist of top-quality components for at least a 100,000+ mile or more service life. Our test fleet of vehicles have an average of 300,000 miles and counting on each of the heater units! Our 2017 Super Duty has many many years of use with no issues, and our Sprinter van has worked flawless! The original prototype FrostHeater is on my personal Golf TDI with over 425,000 miles, (I drove every mile), and still works strong!
Quality heater with Gates, Continental, and Dayco Brand hoses developed exclusively for the kit. All the hoses come pre-installed on the heater so it bolts right in and works. This is a No-hassle drop-in kit using simple hand tools.
Included in the kit is detailed step-by-step instruction booklet with color
photos to ensure a trouble-free installation with NO guesswork, fabrication,
or backyard engineering required. We're known in the TDI community for our highly detailed
installation instructions. No photo copied sheets here. If you receive photo copied sheets you don't have a Genuine FrostHeater.
*varying range of heat depending upon many many variables